Roberts Gorden MGB Series Wartungshandbuch PDF herunterladen (Seite 56)

COMBAT

CABINET HEATERS INSTALLATION, COMMISSIONING, OPERATION AND SERVICE MANUAL

50 of 85

11.4.1 Simple Fault Finding (burner faults)

If the burner fails to ignite for any reason, it will go to

lockout. This will be indicated by the red light on the

heater or at the remote indicator (if fitted).

1. Press in and release the lockout reset button on

the burner or, if fitted, the remote reset.

Lockout should not occur during normal operation of

the heater and indicates there is a fault condition

which must be corrected.

11.4.2 Simple Fault Finding (oil fired heaters)

Make sure the appliance fuel valve is open and

there is oil in the tank. If the fuel tank or lines have

run dry, the fuel system will need to be vented. For

venting oil-fired heaters, See Page 45, Section 10.7

through Section 10.8.4.

11.4.3 Blocked Flue

If lockout lamp is illuminated call registered installer

to verify. See Page 46, Section 10.8.5.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 91 92

Keine Kommentare

Roberts Gorden MGB Series Wartungshandbuch Seite 56